Dongguan Jiazheng Hydraulic Technology Co, LTD
Dongguan Jiazheng Hydraulic Technology Co, LTD Cylinder & Clamp Quality.Innovation.Fast Delivery
Add to Cart
Upper Flange Manifold Type Hydraulic Swing Clamp Two Mounting Methods Mild Steel Wear and Corrosion Resistance Surface
Product Introduction
1. The total stroke is equal to the sum of the swing stroke and the clamping stroke.
2. Single clamping arm and double clamping arm.
3. The cylinder body is made of medium carbon steel.
4. When increasing length of clamping arm is required, be sure not to exceed 1.5 times of the original length.
Do not exceed maximum fluid flow rate in table. For extended clamp life a simple flow-control valve may be required if the fixture is powered by a high-flow-rate power source
Specification
| Bore of Cylinder (mm) | Φ32 | Φ40 | Φ50 | Φ63 |
| Bore of Piston (mm) | Φ20 | Φ20 | Φ20 | Φ25 |
| Swing Stroke (mm) | 14 | |||
| Clamping Stroke (mm) | 15 | |||
| Press Area pull/push (cm²) | 4.9/8.04 | 9.43/12.57 | 16.49/19.63 | 26.6/31.17 |
| Theoretical Clamping Force (25kg/ cm²) | 125 | 200 | 400 | 600 |
| Fluid | Filtered oil | |||
| Range of pressure (kg/cm²) | 20-45kg/cm² | |||
| Rotating Direction | Turn Right or Turn Left | |||
| Rotating Angle | Standard angle 90°,Optional angle 0°, 45°, 60° | |||
| Acting Type | Double Acting | |||
Ordering Code
RNU L-- 40°x 90°
① ② ③ ④
| ① | Series Code
| RHD, RHUD (double clamping arm) |
| ② | Rotating Direction
| Turn Right or Turn Left
|
| ③ | Bore of Cylinder | Φ32mm;Φ40mm;Φ50mm;Φ63mm |
| ④ | Rotating Angle
| Standard angle 90°；Optional angle 0°,45°, 60° |
