Corrosion Resistant Hydraulic Booster with Sequential Valve Inside Pressure Increasing 3.8 Times
Product Specification and features:
This hydraulic booster has a sequential valve inside. When it oils the cylinder actutor , the sequential valve will be activated if the presetted pressure is reached , and then multiple times pressure is generated.
The increasing pressure times of this item is 3.8 times
Application
This booster is used in such situation , that some hydraulic cylinders need high operation pressure
in the low pressure circuit of hydraulic equipments and machining center fixtures. The hydraulic booster can be activated by solenoid valve in the hydraulic circuit , and then the low oil pressure is changed into high oil pressure automatically.
NOTE
1.Pressure set at 30 kgf/cm2 before shipment.
2.The intensifier is essentially a hydraulic amplifier. In a hydraulic system, if the entire system requires low pressure ,but a branch system requires high pressure, an intensifier can be used to make the system's branch oil circuit or an actuator obtain high oil pressure which is several times (2-7 times) higher than the working pressure of the hydraulic pump to meet the needs of the branch working mechanism, without having to separately set the expensive high-pressure oil pump. The system still works at a lower pressure, so It can reduce energy consumption and reduce equipment costs.
| A | B | C | D | E1 | E2 | F1 | F2 | F3 | H | K | M | N |
| 210 | 139 | 71 | 58 | 82 | 95 | 62 | 80 | 70 | 9 | 9 | 14 | 96
|
Item Code: RB-3.8x45
Pressure Increasing Times: 3.8 times
High Pressure Output Flow : 45cc
