Hydraulic Swing Clamp Casting Engineer Cover Processing Rotary Clamp Cylinder
Product advantages
1. High rigidity, double-guided design
2. Suitable for program control occasions
3. Can hold pressure for a long time
4. Good interchangeability and versatility
5. High precision of movement and repeat positioning, up to 500,000 times, and can be re-installed
6. Using the professional oil seal and 3-slot swing rod, the piston and theswing rod are all integrated forming technology, and the stability is better.
Precautions
1. When the the length of clamping arm needs to be increased , please do not exceed 1.5 times the original length.
2. Note that the operating pressure is less than the maximum rating.
3. Before use, ensure that the intake hydraulic source is cleaned to avoid the damage on the seal
4. The product must be installed on a flat surface, otherwise it will lead to poor precision, leakage and other conditions.
Product Information
| Product Name | HSC Swing Clamp |
| Content | Parameter |
| Bore of cylinder (mm) | Φ25 | Φ32 | Φ40 | Φ50 | Φ63 |
| Diameter of piston rod (mm) | Φ18 | Φ20 | Φ22.4 | Φ28 | Φ35 |
| Swing Stroke (mm) | 9 | 11 | 11 | 13 | 13 |
| Clamp stroke Std/Ext (mm) | 13 | 15/30 | 15/30 | 17/34 | 17/34 |
| Pressure area pull/Push (CM2) | 2.37/4.91 | 4.9/8.04 | 8.63/12.57 | 13.47/19.63 | 21.55/31.17 |
| Theoretical clamping force (3kg/CM2) | 71 | 147 | 259 | 404 | 647 |
| Max operation pressure (kg/ CM2) | 100 | 100 | 100 | 100 | 100 |
| Operation pressure range (kg/CM2) | 15-70 | 15-70 | 15-70 | 15-70 | 15-70 |
