High Clamping Force Hydraulic Swing Clamp multiple bores of the Cylinder Black Oxide Finish on Surface Carbon Steel
Product Introduction
1. The bores of this series of cylinder are including Φ25,Φ32,Φ40,Φ50 and Φ63 and the rotating angles are including 0°,45°,60°,90°and 180°.
2. This series of hydraulic swing clamps are applied under the situation that large clamping force is needed and used to clamp the large work piece. It is widely used in mass production and it features high automation.
3. The cylinder body is made of carbon steel.
Specification
| Type of cylinder (mm) | RNS-25 | RNS-32 | RNS-40 | RNS-50 | RNS-63 |
| RNSD-25 | RNSD-32 | RNSD-40 | RNSD-50 | RNSD-63 |
| RNTS-25 | RNTS-32 | RNTS-40 | RNTS-50 | RNTS-63 |
| RNTSD-25 | RNTSD-32 | RNTSD-40 | RNTSD-50 | RNTSD-63 |
| Swing stroke(mm) | 12 | 14 |
| Clamping stroke(mm) | 14 | 15 |
| Fluid | Filtered oil |
| Max pressure (kg/cm²) | 70kgs/cm² |
| Normal operation pressure (kg/cm²) | 20-45kgs/cm² |
| Rotating direction | Turn Right or Turn Left |
| Rotating angle | Standard angle 90°,Optional angle 0°,45°, 60°, 180° |
| Acting type | Double Acting |
| Fixing type | Flange |
| Bore of piston | Φ18 | Φ20 | Φ20 | Φ20 | Φ25 |
| Press Area pull/push (cm²) cm² | 2.36/4.9 | 4.89/8.03 | 9.42/12.56 | 16.48/19.62 | 26.25/31.15 |
| Theoretical Clamping Force (25 kg/cm²) | 59kgs | 120kgs | 200kgs | 400kgs | 600kgs |
Ordering Coder
RNS L-- 40°x 90° G
① ② ③ ④ ⑤
| ① | Series | RNS, RNSD, RNTS, RNTSD |
| ② | Rotating direction | Turn Right or Turn Left |
| ③ | Bore of cylinder | Φ25mm;Φ32mm;Φ40mm;Φ50mm;Φ63mm Note:Φ63mm is not available for RNTS, RNTSD Series |
| ④ | Rotating angle | Standard angle 90°；Optional angle 0°, 45°, 60°, 180° |
| ⑤ | G:manifold |
