Double Acting Upper Flange Pneumatic Swing Clamp Aluminum Alloy Air Swing Clamp Cylinder for Repetitive Production
Features:
1.The bores of this kind of swing clamp cylinder are includingΦ32,Φ40,Φ50 and Φ63;
2.The total stroke is equal to the sum of a swing stroke and a clamping stroke
3.Clamping type : single arm and double arms
4.The material of the cylinder is aluminum alloy
5.If you need to increase the length of the clamping arm ,please don’t exceed 1.5 times of the original length
Actint Type: Double acting type
Specification
| Bore of Cylinder (mm) | Φ32 | Φ40 | Φ50 | Φ63 |
| Bore of Piston | Φ20 | Φ20 | Φ20 | Φ25 |
| Swing stroke (mm) | 14 |
| Clamping stroke | 15 |
| Pressure area pull/push cm² | 4.9/8.04 | 9.43/12.57 | 16.49/19.63 | 28.03/31.17 |
| Theoretical Clamping 5kg/ cm² | 25kgs | 47kgs | 85kgs | 130kgs |
| Fluid | Filtered air |
| Max operation pressure | 10kg/cm² |
| Range of pressure (kg/ cm²) | 4-7kg/cm² |
| Rotating direction | Turn right R or Turn left L |
| Rotating angle | Standard angle 90°(±2°),optional angle 0°(±2°), 45°(±2°), 60° (±2°) |
| Acting type | Double acting |
Ordering Code
RAU L 40 x 90°
| RAU | Series | RAU(single arm),RAUD(double arms) |
| L | Rotating direction | Turn right or turn left |
| 40 | Bore of cylinder | Φ25mm;Φ32mm;Φ40mm;Φ50mm;Φ63mm |
| 90 | Rotating angle | Standard angle 90° optional angle 0°, 45°, 60° |
